Melt and Pour Soap Base for Vanillin-Based Additives

Melt and Pour Soap Base for Vanillin-Based Additives 

Glycerine soap for vanillin-based additives is a melt and pour soap base that produces soap bars with high clarity. This base retains its high transparency even when vanillin-based oils or fragrances are used. Thanks to its high glycerine content, it is particularly moisturising and its high stability makes it ideal for adding soap colours. Our soap bases offer endless creative design options for soap creations to suit your wishes. Rely on Stephenson's many years of experience as an established British brand that is committed to consistent quality and reliability, ensuring that every soap meets the highest standards. Stephenson soaps are made from the finest natural ingredients and guarantee a luxurious and effective skincare experience. All ingredients are vegan and cruelty-free.

Anleitung

1. to produce smaller bars of soap, the raw soap can be processed in portions. To do this, remove the raw soap from the packaging, cut out pieces vertically and melt down as required.

2. the raw soap can be melted in smaller pieces in a water bath at approx. 75 °C or directly in the 1 kg packaging in the microwave for approx. 2 minutes. As soon as the raw soap has melted completely, additives such as colours, fragrances, glitter, flowers etc. can be added and everything mixed slowly and thoroughly. A total of up to 3 % additives, of which a maximum of 1 % fragrance, can be added to the raw soap.

3. the finished soap mixture can either harden in the packaging or be poured into suitable soap moulds. Pour the liquid soap base slowly into the soap mould and spray the mould with rubbing alcohol to prevent bubbles from forming on the surface of the soap. Allow the soap to cool and harden completely before removing it from the mould. The soap bars will come off more easily if they are left in a cool place for 24 hours. Once the soap has hardened completely, you can pack it as required.